The new UMC-750 universal machining center from Haas Automation, Inc., is designed to be a cost-effective solution for 5-sided and simultaneous 5- axis machining, the company said. The UMC-750 is a 5-axis 40-taper vertical machining center with 30” x 22” x 20” travels and an integrated dual-axis trunnion table. The machine is equipped with an 8,100 RPM inline direct-drive spindle and comes standard with a 40+1 tool side-mount tool changer. The UMC-750’s dual-axis trunnion table can position parts to nearly any angle for 5-sided (3+2) machining, or provide full simultaneous 5-axis motion for contouring and complex machining. The trunnion provides +35 and -110 degrees of tilt and 360 degrees of rotation for tool clearance and large part capacity, and the 630 x 500mmtable features standard T-slots and a precision pilot bore. The machine’s 8,100 RPM inline direct- drive spindle is powered by a 30 HP vector drive system. The Haas inline system couples the spindle directly to the motor to reduce heat, increase power transmission and provide high quality surface finishes, the company said. An optional 12,000 RPM inline direct-drive spindle is available. Both spindles yield 90 ft-lbs of cutting torque. A wide selection of high productivity options are available for the UMC-750, as well, including a belt-type chip conveyor, high-pressure through spindle coolant systems, high-speed machining control software, the Haas Wireless Intuitive Probing System, expanded program memory and more. For more info contact: Haas Automation, Inc. 2800 Sturgis Road Oxnard, CA93030 800-331-6746 www.HaasCNC.com Booth S-8119