“MCMachinery Systems Inc. introduces the fifth generation MWX4 machine, elevating waterjet cutting to a new level of precision. This machine is designed for multiple axes cutting, combining speed and precision for shops looking for accuracy and reliability,” said a Mitsubishi spokesperson. With the MWX4, Mitsubishi and MC Machinery introduce the new Taper Control System. This is a servo motor-driven system with greater Aaxis tilt angle and unlimited rotating angle C-axis to allow for straighter parts in thicker material. TheMWX4 features theMitsubishi M730 CNC controller with 3-axis joystick positioning and full keyboard, and a standard Garnet Removal System. Metamation Software is included with True-Shape Nesting and CAD/ CAM, and a submerged cutting system is built into the tank’s design. Positioning speed is 687 IPM (22.022 m per min), and the machine features a pressurized abrasive hopper with 670-lb. Capacity. The adjustable slat table is located by slots, and the height is adjusted by the indicated flat bar. TheMWX4 machines are available in multiple sizes. The X4-612 dimensions are as follows: travel distances are 72 in. By 144 in. By 8 in. (1,829 mm by 3,658 mm by 200 mm), and it will hold amaximumworkpiece size of 82 in. By 153 in. By 8 in. (2,083 mm by 3,886 by 200 mm). The pump is available in 60 horsepower and 90,000 PSI, standard and 125 horsepower at 125,000 PSI. “TheMWX4 represents a dramatic step forward in accuracy and precision for waterjet. If speed is desired, it’s one of the fastest. If precision is needed for the cut, it’s the most accurate,” said Steve Szczesniak, National Product Manager. For more information contact: MC Machinery Systems, Inc. 1500 Michael Drive Wood Dale, IL 60191 630-616-5920 www.mitsubishi-world.com