CIMCOOL Fluid Technology offers metalworking fluids for machining, grinding, stamping, metal-forming, cleaning and many specialty applications. “CIMTECH synthetic products are designed to improve both machining and grinding applications without using mineral oil. The CIMTECH family of products provides good results on ferrous and non-ferrous metals in both heavy- and light-duty grinding and machining operations and is formulated to reject tramp oil while providing a clean, low foaming, synthetic metalworking fluid that can enhance machine performance and product quality.” CIMSTAR products include a range of general machining and grinding fluids recommended for ferrous and many non-ferrous metals in general purpose and medium-to heavy-duty operations. CIMSTAR fluids typically contain a low to moderate amount of mineral oil and are especially useful in applications that require long fluid life and cleanliness. CIMPERIAL fluids are designed for heavy-duty machining and grinding on both ferrous and non-ferrous metals and many contain extreme pressure additives that are intended to enhance machining and grinding performance capabilities. CIMPERIAL soluble oils are designed to offer long fluid life, corrosion protection, high lubricity, low foaming characteristics and a high level of rancidity control. CIMFREEE botanical fluids are formulated with renewable resources and are designed to leave a relatively small footprint. CIMVANTAGE is an economical product line developed exclusively for light-duty applications. CIMCOOL HFP Fluids with FACT (foam arrest control technology) provide foam control through the combination of product design, the selection of raw materials and antifoam technology. CIMMILL fluids are new for tube and pipe processors and are designed with to deliver more productivity and cleaner operations. MILFORM and MILDRAW products include a range of stamping and drawing fluids offering lubricity, cooling and corrosion control while making part cleaning easy and efficient, the company said. MILFORM and MILDRAW water-soluble products are available as synthetics, soluble oils and straight oils and are Appropriate for both ferrous and non-ferrous metals in applications ranging from lightduty stamping to heavy-duty drawing. MILPRO products offer a combination of mineral oils and additives. MILPRO oils promote reduction in tool and grinding wheel usage and offer corrosion control so as not to stain aluminum or “lower” grades of steel, the company said. For specific honing operations that require a lower viscosity, MILHONE oils are suitable. MILPRO and MILHONE products work in a variety of applications, including honing cast iron or steel, light stamping, grinding drill flutes, moderate-duty grinding, heavyduty broaching and gear cutting. CIMCOOL’s QUANTALUBE watersoluble fluids, which contain a patented “super-lubricant” to bridge the gap in physical lubricity between straight oils and water-based product, transform grinding and machining lubricity. CIMCOOL “Z” Products are designed to provide enhanced productivity with good rancidity control and longer fluid life, minimizing the need for additives and reducing concentrate usage.They are also designed for cleanliness, which can extend sump life, and are intended to offer extended tool life. For more information contact: CIMCOOL Fluid Technology 3000 Disney St. Cincinnati, OH 45209 888-246-2665 www.cimcool.com Booth N-7546