“Midaco Corporation is focused on creating products that increase productivity and decrease downtime in your shop. One simple and inexpensive solutionMidaco offers is anAutomatic Door System for yourmill, lathe, robotic application or othermachinery with single or double doors. Not only does it save time in production, but this self-contained system also improves ergonomics by eliminating manual door opening tasks,” said Michael Cayley, Sr., President, Midaco Corporation. The Auto Door System uses an air cylinder to operate the door by using either a manual push button or the automatic “Smart System” interfaced with the machine’s control. In both cases the system is furnished with a door mounted safety stop that will quickly exhaust air if any obstruction is encountered during door closure, and the “Open Door” commands are ignored if spindle or chuck is running. In order for the command to be ignored the parent machine must be able to supply or receive the signal. The Auto Door System is one step in automating a shop’s machinery to get more parts out the door. Midaco also offers Automatic and Manual Pallet Changers that quickly swap pallets in and out of a machining center to keep the spindle running. All of Midaco’s products are made in the USA. Midaco plans to exhibit its products at HAAS-TEC April 9-12, 2013.The location is: HaasAutomation, Inc., 2800 Sturgis Rd, Oxnard, CA, 93030, www.haascnc.com. For more information contact: Midaco Corporation 2000 East Touhy Avenue Elk Grove Village, IL 60007 847-593-8420 www.midaco-corp.com