CS Unitec’s new magnetic drilling machine, theMAB 1300, is designed for continuous use in heavy-duty drilling applications. The drill’s 20 Amp/110 Volt double-insulated, reversiblemotor is suitable for drilling structural steel and other metals. The versatility of the 4-speed oilbath gearbox (30-80, 50-120, 130-350 and 210-550 RPM) allows drilling of holes from 7/16” up to 5- 1/8” diameter with annular cutters. Capabilities include large-hole tapping up to 1-5/8” diameter, up to 1-3/4” twist drilling, countersinking up to 3” and reaming up to 2”. The MAB 1300 has a 1-1/4” arbor with an adapter for 3/4”. The unit includes an integrated automatic cooling/lubrication system to increase the life of the annular cutters by reducing friction and wear. The high-density, three-coilmagnet has a holding strength of up to 23,600 pounds, providing the pulling power required for heavy-duty drilling. Integrated sensors include TEMPTEC for magnet overheating protection, SENSORTEC for visualmagnet adhesion indication and an electronic safety shutoff sensor to automatically shut down the drill motor if the magnet loses contact with the material. An internal cable routing system helps protect the motor power cord from external damage. The drill weighs 112 lbs. And is equipped with an eye-hook for liftingwith a hoist. For more information contact: Tom Carroll, President CS Unitec, Inc. 22 Harbor Avenue Norwalk, CT 06850 800-700-5919 info@csunitec.com www.csunitec.com