The TRAUB TNL18 sliding/fixed headstock automatic lathe with seven linear axes now is available with an extra B-axis, expanding its applicability to particularly challenging machining tasks, the company said. With the additional B-axis in the upper tool carrier, which can pivot 100-degrees, highly complex parts and complicated contour elements that also require additional operations such as milling, drilling, lateral drilling or threading may be machined at any angular position by the new TNL18-7B. Previously, for parallel main spindle operations, angled tool holders were necessary with “normal” turret positioning; now the turret simply pivots. In addition, the 8-position turret with the double driven tool holder per position capability provides additional flexibility. Features include: • Setting up angle-adjustable tool holders is no longer necessary. • No need for using expensive angle-adjustable tool holders. • The omission of angle-adjustable tool holders creates more stable machining conditions in the machine system. • Due to additional operations in any angle positions, highly complex workpieces can be produced more flexibly and efficiently in a single setup, the company said. Tool Turret Indexing • Carried out by an NC rotary axis without a mechanical lock. This permits free angle positioning of the turret. • All turret stations can be equipped with fixed or live tool holders. • The number of tools in the machine can be increased to as many as 54 tool stations through dual- and multi-tool holders. • There is less setup effort for the operator, resulting inmore productive time. • High-precision, fast turret indexing enables a very fast chip-to-chip time of 0. 3 s, which is closely comparable to that of a linear tool carrier. The new TNL18-7B also comes with the new TRAUB compact shank system, an improved system for highprecision mounting of tool holders in the turret. “Tool holders are seated deeper in the turret, which results in less leverage effect and, thus, higher stiffness,” said a company spokesperson. “For live tool holders, the large shank diameter enables insertion of roller bearings with large diameters. A quickchange system permits a high-precision and fast tool change without removing the tool holder. The compact shank system increases tool life and also contributes to improved surface quality. “It takes just a few steps to convert the TRAUB lathe from sliding headstock to fixed headstock turning mode and vice versa. The extremely long Ztravel distance of the headstock ensures proper positioning of the main spindle, either for sliding headstock turning or fixed headstock turning. The powerful main spindle is equipped with a C-axis as standard and it delivers high torque in order to achieve large cutting volumes. “The vertical machine bed design results not only in a favorable chip flow but also an extremely compact footprint. This is also made possible by integrating the control cabinet in the upper part of the machine, enabling space-saving integration of the automatic lathe into existing machine groups or cells. “The working area is easily accessed by the operator through its remarkably high and wide sliding door. This provides a lot of room for setup and changeover activities. A generously dimensioned inspection window allows the operator to keep a close eye on the machining process. “For servicing, the back cover is quickly removed to allow full access to the mechanical assemblies. The hydraulic and pneumatic components are also arranged with full accessibility to the rear of themachine and can be easily checked at a glance. “The TNL18-7-B is equipped with the TRAUB TX8i-s control, which is based on the CNC control from a leading controlmanufacturer, while the user interface software is TRAUB-specific. “The control is designed to allow reduced setup time due to higher NC performance; alternate programming, optimization and simulation in interactive or NC mode possible, error avoidance and setup time reduction due to object-oriented interactive user guidance (integrated TX8i-s); sensitive tool break and wear monitoring and seamless support because themachine, control and drives are from a single source.” For more information contact: INDEX Corporation 14700 North Pointe Blvd. Noblesville, IN 46060 317-770-6300 sales@index-usa.com www.indextraub.com