Hyundai WIA’s i-CUT320M highspeed CNC VMC is tailored to the needs of the electronics, mold and medical industries. The i-CUT320M features Hyundai WIA’s smallest footprint within its range of mill/drill VMCs. The i-CUT320M is configured with a 24,000 RPM direct drive spindle for taking deep cuts at high speeds for precision applications. Angular bearings provide high-speed accel/decel for smooth machining at high RPM. The standard oil cooling system helps maintain the temperature of the main spindle, reducing thermal growth and increasing part accuracies. The machine is capable of rigid tapping at 6,000 RPM. The standard Big Plus spindle system (BBT #30) provides dual contact between the spindle face and the flange face of the tool holder. This is intended to help increase tool rigidity, reduce run out and add productivity to machining applications. Spindle motor is 14 HP with spindle torque rated at 8/6 Nm. The Big Plus spindle is designed to provide fast material removal rates, high accuracy and rigidity. It offers stability when run at high spindle speeds for high RPM precision machining. The bed, column and saddle of the i-CUT320M are designed using finite element analysis (FEA) and are composed of Meehanite cast iron to help minimize deformation when performing heavy-duty cuts. The rigid bed is designed to absorb vibration for stable machining. To help eliminate thermal growth during machining, all axes are driven by high precision double-nut ballscrews. The double pretension design provides improved positioning and repeatability with virtually no thermal growth.All ballscrews are connected directly to the servo drive motors without gears or belts, eliminating backlash. Rapid high-speed axismovement is achieved by the use of linear motion guide ways in all three axes.Axes travels are 16.5”, 12.6” and 13” (XYZ) and rapid traverse is 56 m/min in all axes. Thru spindle coolant is available as an option. This feature is particularly useful for deep hole drilling where it is necessary to keep chip flow clear of the cutting surface. Thru spindle coolant also helps to increase tool life and decrease cycle time. Hyundai WIA’s i-CUT320M VMC is outfitted with a 20-tool (24-tool optional), sidemount swing arm type tool changer and offers tool change times of 1. 5 seconds tool-to-tool. The ATC and magazine are separated by a shutter system that closes during machining, thus keeping chips and fluids clear of the ATC and magazine. When a tool change is required, machining stops, the shutter opens, the ATC exchanges old tool for new, the shutter door then closes and machining begins again. The i-CUT320M features a Siemens 828D Series CNC control with a 10.4” color LCD. For more information contact: Hyundai WIA Machine America Corp. 450 Commerce Blvd Carlstadt, NJ 07072 201-636-5600 www.hyundai-wiamachine.com TX Troy Owens Hillary Machinery Inc. 1825 Summit #207 Plano, TX 75074 800-683-1516 sales@hillaryinc.com www.hillaryinc.com OK Jeff Messenger Hillary Machinery Inc. 5415 S. 101st E Ave. Tulsa, OK 74146 800-683-1516 jeffmessenger8@gmail.com www.hillaryinc.com AR, LA John Kearney Kearney Machinery, Inc. 5211 Linbar Dr., Ste. 511 Nashville, TN 37211 615-332-7400 johnk@kearneymachinery.com www.kearneymachinery.com NM Dan Jend Jend Machinery, Inc. 1508 Orion Place Longmont, CO 80504 303-775-3697 danjend@jendmachinery.com www.jendmachinery.com